Ginny's Ice Maker with Bottle Opener

Hello, The care and cleaning instructions are printed on the owners manual included with the ítem. 1. Turn off and unplug the appliance. 2. Allow the appliance to come to room temperature before cleaning. 3. If the tray behind the evaporator fingers is not in the vertical position, gently push the tray back so that all water drains into the reservoir. 4. Open the drain plug to drain out remaining water and remove the ice basket. 5. DO NOT use abrasive brushes or pads or harsh cleaning solutions. 6. Wash the ice basket and ice scoop in warm, soapy water. Rinse and dry. 7. DO NOT clean the evaporator fingers. 8. To clean the interior of the ice maker, use a soft cloth dampened in warm water and vinegar. Rinse with a clean damp cloth. 9. Wipe the exterior with a damp cloth. 10. DO NOT immerse any electrical appliance, its cord, or its plug, into water. 11. When the ice maker is not in use, or is being stored, ensure the reservoir is completely dry to keep mold from forming. Store with the drain plug open. We hope this information is helpful to you.

Hi Laura, The Ginny's Ice Maker with Bottle Opener makes small or large cubes.

Hi, Thank you for your inquiry. The clarity of the ice cubes will depend on the water used. We hope this information is helpful.

Hello Millie, The Ginny's Ice Maker with Bottle Opener makes Ice that is Hollow bullet-shaped, approximately 1” long x 5/8” diameter. Thank you for reaching out.

Hello, please see the Owner's Manual directly under the description of the item. We hope this information is helpful to you.

Hello Lori. The Ginny's Ice Maker with Bottle Opener makes hollow bullet-shaped ice cubes. Thank you for your inquiry!

Hi, The ice cubes are not super small. There is a setting for small or large ice cubes. We hope this information is helpful.

Hello Michelle. No it does not have a self-cleaning mode.